If you wish to maintain your car in a good condition then you will need to know ways to rinse, wax and shine it. Valeting your car frequently will help keep it looking great, but will also preserve the paint and finish from the ravages of time, the weather and the natural environment.

Using the Right Techniques

All of the worn out cloths and sponges you’ve used to wash your car before have to be thrown out. The best choice here is a very soft, wool wash glove. Do not make the blunder of guessing you’ll wash your car with any sort of old thing. Real wool wash mitts retain far more water and shampoo, but they’re also your best option for cleaning the exterior of your car without damaging it.

You’ll also have to use the two bucket technique for cleaning – one bucket holds the wash solution and another holds clear water. Your clean water is used to wash the mitt once using the shampoo to lift off the dirt. Without this method, you would simply be moving the dirt back onto the car each and every time.

You will also want a guard at the base of the buckets to help make the two bucket process much more successful. Bucket guards are intended to block your wash mitt from picking up the dirt that drops through the guard. When you’ve done with washing the outside of your vehicle, you’ll be wanting to dry it well using a microfiber or PVA towel.

Washing and Drying

It’s ideal to clean your vehicle where there is a lot of cover from the sun. To help you take off as much dirt as you can, it’s best to rinse it initially. You will need to wash your vehicle from top to bottom. Don’t use swirling movements and instead work with a straight and overlapping process. It is best to rinse each spot the moment it’s washed. While rinsing, go with a slow stream of water – avoid using any high force.

Drying your vehicle is ideally done with two decent towels. Be sure to refrain from scrubbing your car dry because this can result in scratches. Drain the towels when they start to store the water. Your first towel must be for almost all of the job. When it’s soaked, make use of the second towel to dry out any leftover water droplets on your car.

Polish and Wax

Polishing will be the next stage here. To get the best results you will need to work with a nonabrasive polish. You may also want to use a few various kinds to get the perfect shine. Polishing regenerates your car’s paint to a superior shine by getting rid of any small flaws.

An electric powered car polisher may be used to make sure your polish is put on properly. It’s hard to deliver equal results by yourself. Operate only in smallish sections – you’ll have to shift in 22 foot areas, and work steadily.

Finish off your polishing process by going side to side to guarantee the whole space is always coated. As you’re polishing, be sure the polisher’s pad is level all of the time – the side of the pad can harm your finish. Working with wax (have a decent artificial or carnauba wax) is much like polishing, and can be performed by hand or with the aid of the electric polisher. Hand waxing is often the better decision, though.

If you happen to keep to the whole car valeting process often, you can be certain that your vehicle will always be looking amazing at all times.

Learn more about car valeting. Visit our Car Valeting HQ website to find out about car washing, polishing and waxing and what it can do for you.