If your car still has the cassette player than you feel very annoyed to repeat the track each time where you can to rewind, stop, play in a cassette player its highly recommended that switch over to an-in dash CD player using this tips on how to install an-in dash CD player. The CD player can be installed in the dash board by replacing the cassette player. But one has to ensure that he has an idea of the automobile make and its model so that the installed CD player is fit as in stock model.

One of the things to be noted while buying a new CD player is its size. Make sure that the CD player is of perfect size as provided in the dash board. While searching for a new in dash CD player care must be taken so that the model of your car as different cars have different make based on their model. It is also important to buy a car stereo connector for the wiring and an in dash CD player kit. This makes the work look more professional.

The first step in the process is to find the things we must need to complete the task. Few things are very essential to build up a dash player kit and they are around twenty pieces of butt splices. They must have insulations done and wire strippers are must as during installation the pliers and strippers play a very important role. Lastly the most important is the wire which connects the stereo.

Insert an end of the orange wire coming out of the wiring connector of the car stereo into the vinyl insulated butt splicer. Now close this side of the splicer. This can be easily done using the nose pliers. Make sure that the butt splicer holds the wire firmly. Now insert the end of the orange wire that is coming out of the rear end of the CD player into the other end of the butt splicer and close this end with the use of the nose pliers. Be sure that there are no loose connections and the wire is held firmly by the butt splicer. Repeat this step for all the wires that can be seen in wire connecting the stereo. Make sure that each wire is matched very well with the similar colour and size of the player.

In the next step in the process we should remove the insulation from all the wires that comes from the wiring connector for car stereo. The insulation should be removed for about 1/8 to quarter inches and here also care should be taken so as to avoid the damage caused to the internal wiring.

There will be a vacant space available just to the back side of the CD player. Use this to place the remaining wires securely. Now place the disk player and the dash installation kit inside the automobile. Now to keep the CD player secure, screw the dash installation kit to the automobile using the same holes left by removing the old cassette player.

After that, he car stereo player along with its wiring connector are placed on the dashboard and are adjusted so that it completely rests within the space provided and should also be properly fit. Now the Car stereo wiring connector and the wire connector of the vehicle are to be properly linked this can be checked with the click sound produced by the connectors when they are linked.

One can modernize the car by knowing how to install an in – dash CD player, and these steps helps to know it.

Want to find out more about Car Hifi, then visit Author Name’s site on how to choose the best Car Audio for your needs. Get a totally unique version of this article from our article submission service