Although it is barely a new concept, the idea of making a bio diesel has gained much popularity these days. Actually, the idea was conceived with the development of the first compression-ignition engine, which used peanut oil. This is an important point to remember when one wants to learn how to make bio diesel.
Bio diesel can therefore be described as a non-petroleum-based fuel produced from vegetable and animal fat. Although the fuel can be used alone, it cans also be blended with ordinary diesel to fire a diesel engine. This makes it a great option especially considering the increasing prices of fossil fuels.
Making bio diesel is not a very difficult process. This makes it possible to learn the skill from different sources. There is a wide selection of materials that can be used in producing this product. These include feedstock and oils such as soybean or rapeseed oil. Bio diesel can also be extracted from vegetable oils especially from hotels. Animal fats such as chicken fat lard and tallow. In some cases, algae is also used but not for commercial production.
When you want to learn how to make bio diesel, the first step will be identifying possible sources of oil. This will help you learn the right procedure since different materials introduce slight variations to the process. Some of the cases will also necessitate specialized equipment such as bio diesel processors while in others, this may not be essential. For instance, extracting bio diesel from exhausted cooking oil using sodium hydroxide and methanol is quite simple and does not require the processor. This method is however suited for limited production.
After establishing the oil source, the next step is testing it. This is necessary since the quality of your final product is usually determined by the ingredients. The two main factors that determine the quality of bio diesel you get are how acidic the source oil is and how wet it is.
The best oil sources, which will make the process easier, are those with relatively low water and acidic content. This necessitates the need to learn how to test the oil using different methods such as heating or using a water testing kit. Acidity is tested by adding the oil to a pH neutral alcohol, a process called titration.
Filtration is the other major step in making bio diesel. This is very important especially when using exhausted vegetable oil as it helps remove food particles and other contaminants. Drum filters are normally used since they are very effective. In filtration, one should learn about micron rating in order to choose the right filter for your equipment. Normally, a smaller rating means smaller filter holes.
Before you can embark of full production of bio diesel a test batch is very important. You should therefore learn how to make this using items obtained from the local grocery stores. You will also need to obtain the actual production equipment. Some of the equipments needed include oil collection containers, oil transfer and filtering capability, a bio diesel processor and bio diesel washing vessel. You also require storage containers, transfer pumps and a titration kit.
Normally the projected production capacity is one of the main factors determining the equipment to be purchased. With all this information in mind, it will be possible to learn how to make bio diesel.
Get those several choices for renewable energy by going online. One choice you have will be biodiesel. To learn more about it go online now to learn those benefits. Check here for free reprint licence: Essential Considerations When You Desire To Learn How To Make Bio Diesel.